For non-metal abrasion resistance floor based cement
non-metal abrasion resistance floor has been applied widely over various works, but all sorts of questions exist in the process. For example, resillage, fading, floating alkali, poor surface strength, poor wearing capability. Now, SM and SM-F are a new type high range admixture, better dispersible to cement and pigment in abrasion resistance materials.

The primary element of the product is sulphonated melamine polymers, formed by spray-dried.

With a suitable dosage, the water reducing ratio will reach 25% above. In the non-metal abrasion resistance materials, it is easier to slurry and can reduce the small pore in the wearing layer, not easier to produce the resillage or fading on the floor surface when adding SM or SM-F in the polishing process.
Also, it is easier to obtain the early strength when adding SM or SM-F, the maintainable time can be reduced. The durability is better.
SM and SM-F are a white powder form that it is no influence in the process of the matching colors for non-metal abrasion resistance materials. Especially, it is not influence to anticipative color for the green pigments materials when adding SM or SM-F.
SM or SM-F has a better dispersibility to various cement, and has a better dispersibility to all kinds of pigments.
SM has a wide adaptable to various cement, especially, it has a better dispersant to calcium aluminates cement.
SM is good to the adaptability of the all kinds of mineral admixture, for example, silicon, gangue, zeolite powder.
SM is also applied in the self-leveling slag binders widely.